DPMS 308 Carbine Buffer Spring
DPMS offers replacement components for the AR-15 that are made to strict military specifications. These high quality components will provide excellent fit and reliable function in your AR series rifle and are perfect for upgrading existing components or replacing worn or broken parts.
List Price: $6.00
Our Price: $5.00
LBE Unlimited End Plate
LBE AR Receiver End Plate machined from 4140 steel with a manganese phosphate coating. Made in USA.
List Price: $7.99
Our Price: $6.50
Strike Industries MLOK Covers
The new SI M-Lok Rail Covers are an exciting new addition to the Strike Industries product line. The MLOK Covers provide ultimate placement options being single pieces meaning, without having to cut to size, you can plug any MLOK slot you need and still have the useable slots open for your accessories and at the same time provides more dexterity for positive weapon control with the aggressive texturing. The SI MLOK Covers are made from impact resistant nylon reinforced polymer for durability and long term use. If you have an MLOK Rail, Strike Industries has you covered!
List Price: $7.95
Our Price: $6.95
LBE Unlimited Castle Nut
LBE Castle Nut machined from 4140 steel with a manganese phosphate coating. Made in USA.
List Price: $8.99
Our Price: $7.50
Magpul MOE Trigger Guard
The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations.
List Price: $8.95
Our Price: $8.50
Magpul MS1 Paraclip
Clip-style sling attachment point for 1-1/4" webbing. Lockable, Melonite finished steel and reinforced polymer hardware. Compatible with ASAP Plate, RSA, MSA, SGA Receiver Sling Mount, and many other clip-in sling attachment points*. Combine with the MS1 Sling for a dedicated two-point sling, or with MS1 MS3 Adapter or MS1 MS3-QD Adapter for a two to one-point convertible sling.
List Price: $9.95
Our Price: $9.45
Strike Industries AR Enhanced Bolt Catch
The Enhanced Bolt Catch is another piece in a line of high quality parts for the AR15 from Strike Industries. The SI AR-EBC features an extra wide bolt catch lever surface making its operation effortless. Its solid construction and clean matte black finish make it a great looking replacement or build project. It’s a great value for an essential item. If you need the parts to keep your AR in top shape, look no further than Strike Industries.
List Price: $13.95
Our Price: $12.00
Strike Industries AR15 Anti-Walk Pins
The SI anti-rotation/anti-walk pin kit adds an extra degree of security to prevent your pins from walking out under fire or harsh use. Tool-less installation and disassembly allows for ease of maintenance, with no small screws to back out or become lost.
List Price: $14.95
Our Price: $12.95
Strike Industries Mag Catch
The Strike Billet Magazine Catch Assembly features a billet magazine release button. Sculpted from a solid piece of 6061 aluminum, the button offers a functional and aesthetic upgrade to your AR. Deep serrations and ergonomic shape facilitates positive engagement and identification even in the dark or adverse conditions. The blind thread and color anodized options provide for a unique, custom look.
List Price: $16.95
Our Price: $13.95
LBE Recoil Buffer
AR15 Carbine Length Recoil Buffer. Made in USA.
Standard Carbine Buffer - 3.0 ounces
H1 Heavy Buffer - 3.8 ounces
H2 Heavy Buffer - 4.7 ounces
H3 Heavy Buffer - 5.6 ounces
308 Carbine - 3.8 ounces (2.485")
List Price: $39.99
Our Price: $15.00
Strike Industries Carbine Flat Wire Spring
The Strike Industries Carbine Flatwire Spring is an economical, easy upgrade to any AR system with a carbine buffer system. The flatwire spring increases service life of the platform, smooths out the shooting cycle and greatly outlasts the stock spring. Increased bolt load, in addition to decreased compressing force, increases reliability in cycling and makes shooting more comfortable. At a cost not much greater than stock carbine springs, the SI Flatwire is an easy option for those either looking to replace worn buffer springs or begin new builds.
List Price: $19.95
Our Price: $17.95
BCMGUNFIGHTER Grip Mod 3
The Bravo Company Manufacturing BCMGUNFIGHTER MOD 3 Grip provides a reduced angle for improved ergonomics. Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise 'beavertail' style back strap. MOD 3 grips are up to a ¼ inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. A hinged trap door offers storage inside the grip sealed with a water-resistant rubber gasket. Manufactured from high quality, impact resistant polymers, and test fit to ensure proper function.
List Price: $22.00
Our Price: $18.00
Strike Industries AR15 Shift Pins - BLK
The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove your stock assembly (endplate, castle nut, buffer tube, etc.). Simply rotate and remove. The SI Shift Pin is CNC machined from solid steel for strength, precision fit and corrosion resistance. This is a replacement for the standard AR15/M16/M4 takedown pins and fits most AR standard and billet receivers.
List Price: $21.95
Our Price: $18.95
B5 Systems Pistol Grip 23
Your hand will naturally find its optimal position on the B5 System's Type 23 P-Grip, thanks to its steep angle, extended tang, and palm-filling design. By ensuring proper trigger finger placement, this grip has been shown to improve shooting speed while correcting for any tendency to drift into a “chicken-wing” arm placement. The grip’s no-slip texture was carefully engineered for hand comfort.
Strike Industries AR10 Flat Wire Spring
The Strike Industries AR10 Flatwire Spring is an economical, easy upgrade to any .308 AR system. The flatwire spring increases service life of the platform, smooths out the shooting cycle and greatly outlasts the stock spring. Increased bolt load, in addition to decreased compressing force, increases reliability in cycling and makes shooting more comfortable. At a cost not much greater than stock carbine springs, the SI Flatwire is an easy option for those either looking to replace worn buffer springs or begin new builds.
List Price: $21.95
Our Price: $19.95
Phase5 Oversized Mag Release
The Phase 5™ OMR (Oversized Magazine Release) is a drop-in two-piece assembly that replaces the mil-Spec magazine release button. Installation is easy and requires no gunsmithing. Both the OMR button and paddle are machined from 6061-T6 billet aluminum for a lightweight, strong design.
B5 Systems Aluminum Trigger Guard
Designed by B5 Systems with cold weather and tactical operations in mind, this aluminum trigger guard also has a swing-down feature for use with heavier winter gloves. The best guard for big hands and gloved shooting.
List Price: $22.00
Our Price: $20.00
CMMG MK3 Takedown and Pivot Pins for AR-308
CMMG improved pins are slightly longer to make take down much faster and easier. The ends have a divot to allow the use of a bullet tip without the fear of slipping.
List Price: $24.95
Our Price: $20.00
Hogue Beavertail Grip for AR15/M16
The Hogue Overmolded Beavertail pistol grip combines the durability of a fiberglass core with the comfort of rubber over-molding. The palm swells and finger grooves improve the comfort over the standard AR15 grip and the unique texture ensures a solid grip in any condition.
List Price: $29.95
Our Price: $22.00
Magpul MOE+ Pistol Grip w/Storage
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. This AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage and the MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.
List Price: $23.95
Our Price: $22.75
Aero Precision AR15 Lower Parts Kit Minus FCG/Pistol Grip
This Aero Precision AR15/M4 lower parts kit helps you build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.
This lower parts kit does not include the fire control group or pistol grip.
List Price: $24.99
Our Price: $24.00
Strike Industries AR10 Shift Pins
The Strike Industries Shift Pins bring yet another innovative solution to the AR-10/LR-308 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result in not needing to remove extra parts such as an endplate, castle nut and buffer tube. Simply rotate, and remove the pins as shown below. The nearly tool less design combined with our enhanced detent pins that retain inside the pin springs makes swapping out the pins an almost effortless task. No more launching those darn detents into the abyss!
List Price: $26.95
Our Price: $25.00
CMMG Ambidextrous Safety Selector - AR15/Mk3/.308
The CMMG 90-degree ambidextrous safety selector is compatible with AR-15 and AR-10 / LR-308 weapons and allows efficient and safe operation of the fire controls from either side.
List Price: $29.95
Our Price: $25.00
LBE Mil-Spec Buffer Tube
LBE Unlimited receiver extension tube for AR15/M16 & AR308 rifles. Features aluminum construction with a matte black anodized finish, six precision-machined notches to securely grip the adjustable stock locking pin.
List Price: $29.99
Our Price: $25.99
SI Multi-Function Endplate + Castle Nut - Black
The Strike Industries Multi-Function End Plate and Anti-Rotation Castle Nut are designed to update and upgrade the often neglected castle nut and endplate system. With the vast amount of aftermarket support for the AR system today, SI felt that there was a need for a secure system as adaptive as the shooter. This endplate and castle nut system offers an anti-rotational QD socket and sling loops built in. The Anti-Rotation Castle Nut is specifically designed to work with this Multi-Function Endplate. Instead of peening the endplate to secure the castle nut, a set screw fulfills this function to allow for multiple uses as you upgrade or update your build.
List Price: $28.95
Our Price: $26.95
PWS Ratchet Lock & Castle Nut
The Primary Weapon Systems' Ratchet Lock Castle Nut End Plate set works with mil-spec OR commercial buffer tubes and eliminates the need for staking. A quick upgrade to any rifle build, the Ratchet Lock Castle Nut End Plate features a QD mount and easy installation with any buffer tube.
List Price: $29.95
Our Price: $27.95