Home > Accessories > AR Parts > Upper Receiver
Sort By:
Page of 2
LBE AR15 Firing Pin LBE AR15 Firing Pin

LBE Unlimited firing pin for AR15s.

List Price: $9.99
Our Price: $7.50
Savings: $2.49
LBE Unlimited Crush Washer - .308 LBE Unlimited Crush Washer - .308

LBE Crush Washer made from 17-4 PH Steel for .308 caliber rifles. Made in USA.

List Price: $8.99
Our Price: $7.99
Savings: $1.00
SI Ultimate Dust Cover - Polymer SI Ultimate Dust Cover - Polymer

The Strike Industries Ultimate Dust cover is constructed of a high-density polymer making it more durable and functional than traditional dust covers. The Ultimate Dust Cover features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power.  The Enhanced UDC still uses a unique installation system that enables users to remove or install in under 10 seconds flat.

List Price: $15.95
Our Price: $14.50
Savings: $1.45
SI Strike Forward Assist Hex SI Strike Forward Assist Hex

The Strike Industries Mil-Spec Forward Assist Assembly for the AR15/M16 comes complete with spring and roll pin. This product is manufactured from high strength carbon steel and is heat treated. Perfect for upgrading your existing component or replacing worn or broken parts.

List Price: $15.95
Our Price: $14.95
Savings: $1.00
Aero Precision Melonite Gas Tube Aero Precision Melonite Gas Tube

Aero Precision gas tube for AR15 and AR-308 rifles.

List Price: $18.99
Our Price: $15.00
Savings: $3.99
UTG Pro Keymod 4 Slot Rail Section UTG Pro Keymod 4 Slot Rail Section

The Leapers UTG PRO 1.57in 4-Slot Keymod Picatinny Rail Section attaches easily to a Keymod handguard, allowing for adjustable accessory attachment. Manufactured with aircraft grade aluminum alloy, these picatinny rails designed by Leapers can be used independently or connected with multiple rail sections, providing a continuous rail slot for extreme customization.

List Price: $16.95
Our Price: $15.95
Savings: $1.00
Magpul MLOK 3 Slot Rail Section Magpul MLOK 3 Slot Rail Section

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

List Price: $17.95
Our Price: $15.95
Savings: $2.00
Aero Precision AR15 Upper Parts Kit Aero Precision AR15 Upper Parts Kit

The Aero Precision upper parts kit includes the parts you need to assemble your AR15 upper receiver.

List Price: $17.99
Our Price: $15.99
Savings: $2.00
Midwest Industries 5 Slot Keymod Rail Section Midwest Industries 5 Slot Keymod Rail Section

Midwest Industries is well respected in the industry for giving shooters some of the very best gear available anywhere. The M-LOK 1913 Mil Spec Rail Section is another in a long line of excellence that has established Midwest Industries as leader in the industry. If you choose to go with Midwest Industries, you will be going with one of the most reliable and durable in the industry.

List Price: $17.95
Our Price: $16.95
Savings: $1.00
Midwest Industries 7 slot Rail Section MLOK Midwest Industries 7 slot Rail Section MLOK

Midwest Industries is well respected in the industry for giving shooters some of the very best gear available anywhere. The M-LOK 1913 Mil Spec Rail Section is another in a long line of excellence that has established Midwest Industries as leader in the industry. If you choose to go with Midwest Industries, you will be going with one of the most reliable and durable in the industry.

List Price: $21.00
Our Price: $17.95
Savings: $3.05
SI Ultimate Dust Cover - Aluminum SI Ultimate Dust Cover - Aluminum

The Strike Industries Aluminum Ultimate Dust Cover takes everything you love about their polymer UDC’s to the next level. With an all-aluminum construction and CED coating for added durability and a cleaner finish, the Aluminum UDC is the modern evolution of standard mil-spec dust covers. It features an adjustable detent set screw in order to compensate wear on the receiver and increase or decrease opening power. The Aluminum UDC still uses a unique installation system that enables users to remove or install in under 10 seconds flat. But the most notable difference is the patent pending noise-reduction padding that makes it nearly 100% silent during activation!

List Price: $18.95
Our Price: $17.95
Savings: $1.00
Magpul MLOK 5 Slot Rail Section Magpul MLOK 5 Slot Rail Section

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

List Price: $19.95
Our Price: $17.95
Savings: $2.00
SI Strike Forward Assist SI Strike Forward Assist

The New Strike forward assist is the latest addition to the Strike Industries line of performance AR parts. The Forward Assist Plunger is made of lightweight aluminum for those looking to retain the functionality of a forward assist, while seeking weight savings wherever they can. The forward assist pawl is constructed of tool steel to ensure positive engagement of the forward assist ratchets on compatible bolt carriers and maintain long service life.

List Price: $18.95
Our Price: $17.95
Savings: $1.00
BCM Gunfighter Keymod QD Sling Mount BCM Gunfighter Keymod QD Sling Mount

BCM GUNFIGHTER KeyMod­­™ Quick Detachable Sling Mount

List Price: $20.00
Our Price: $18.00
Savings: $2.00
Grovtec 9 slot Keymod Rail Section Grovtec 9 slot Keymod Rail Section

Precision CNC machined from lightweight, solid aluminum with Type III Black Hard Anodized finish. MIL-STD 1913 Picatinny rail pattern allows mounting a variety of lasers, sights and scopes or other accessories. Machined to fit Keymod mounting systems. Includes needed hardware for install.

List Price: $24.00
Our Price: $18.95
Savings: $5.05
Magpul MLOK 7 Slot Rail Section Magpul MLOK 7 Slot Rail Section

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

List Price: $21.95
Our Price: $19.95
Savings: $2.00
BCMGUNFIGHTER Vertical Grip Mod 3 Picatinny BCMGUNFIGHTER Vertical Grip Mod 3 Picatinny

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

List Price: $22.00
Our Price: $19.95
Savings: $2.05
Magpul MLOK MVG Vertical Grip Magpul MLOK MVG Vertical Grip

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

List Price: $22.00
Our Price: $21.95
Savings: $0.05
Magpul MLOK 9 Slot Rail Section Magpul MLOK 9 Slot Rail Section

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

List Price: $23.95
Our Price: $22.75
Savings: $1.20
Magpul Rail Sling Attachement Magpul Rail Sling Attachement

The RSA provides a low profile forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. Made from nitrocarburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail and has been proven to withstand stress tests of over 300 pounds while only weighing a mere 1.3 ounces.

List Price: $29.95
Our Price: $27.95
Savings: $2.00
Vendetta Precision Angled Foregrip - Red Vendetta Precision Angled Foregrip - Red

Machined from billet aluminum, the Vendetta Precision VP17 Mod-A lightweight angled grip provides comfort and control utilizing the M-LOK platform.

List Price: $35.00
Our Price: $29.00
Savings: $6.00
Aero Precision Low Profile Gas Block - .750" Aero Precision Low Profile Gas Block - .750"

Aero Precision low profile gas block for .750" diameter barrels. Phosphate finish for durability and affordability.

List Price: $29.99
Our Price: $29.00
Savings: $0.99
SI Fat Comp 02 SI Fat Comp 02

Strike Industries has developed a series of muzzle devices that work seamlessly with their SI Cobra Dummy Suppressor but also add a unique look to rifles without the faux silencer.  Its 1.5” diameter can fit inside most free float handguard rail systems and directly attaches to any AR barrel with a 1/2”x28 thread pitch.  All FAT COMPs are made of steel and coated with a matte black finish.

List Price: $39.95
Our Price: $35.00
Savings: $4.95
SI Fat Comp 03 SI Fat Comp 03

Strike Industries has developed a series of muzzle devices that work seamlessly with their SI Cobra Dummy Suppressor but also add a unique look to rifles without the faux silencer.  Its 1.5” diameter can fit inside most free float handguard rail systems and directly attaches to any AR barrel with a 1/2”x28 thread pitch.  All FAT COMPs are made of steel and coated with a matte black finish.

List Price: $39.95
Our Price: $35.00
Savings: $4.95
Strike Industries LINK Curved ForeGrip/Handstop Strike Industries LINK Curved ForeGrip/Handstop

The Strike Industries LINK-CFG (Curved Fore Grip) features SI’s (patent pending) LINK system which is mountable to both MLOK and Keymod rails. The LINK-CFG is constructed of 6061 T6 aluminum making it ultra-durable for continued use. Using these grips, shooters can apply different techniques to adapt to various scenarios. At the front, a ridged face allows a shooter to brace the rifle without worrying about the grip moving around. At the rear, the curve can be used as a hand stop. The innovation in this grip will keep you happily stabilized throughout your shooting experience.

List Price: $37.95
Our Price: $35.00
Savings: $2.95
Strike Industries - Venom Muzzle Device Strike Industries - Venom Muzzle Device

Own one of the world's most effective flash hiders! The SI VENOM nearly eliminates 100% of your muzzle flash and quickly disperses the burning gases exploding from the barrel. This flash hider will significantly reduces muzzle flash to help preserve your night vision. No loss of low light/night vision means the potential to make faster follow up shots, as well as increased situational awareness. The four prongs on the end of the brake are designed to protect the muzzle crown and gives this flash hider a one of a kind custom look!

List Price: $44.95
Our Price: $39.95
Savings: $5.00
Ergo Low Profile Adjustable Gas Block - .750 Ergo Low Profile Adjustable Gas Block - .750

The Ergo .750 Adjustable Gas Block is designed to fit under nearly all manufacturer’s free float handguards. Adjustments are made via a 5/64″ set-screw and a 5/64″ retaining screw ensures the system remains locked, so no need for Locktite.

List Price: $50.75
Our Price: $46.00
Savings: $4.75
Vendetta Precision VP-06 Muzzle Brake Vendetta Precision VP-06 Muzzle Brake

Engineered to be an effective and affordable option for all shooters, the VP-06 from Vendetta Precision does more than please the crowd. Enjoy fast follow up shots, less recoil, and high quality at a price for anyone's budget.

List Price: $59.00
Our Price: $55.00
Savings: $4.00
VG6 Gamma 556 Muzzle Brake VG6 Gamma 556 Muzzle Brake

The VG6 GAMMA 556 is a muzzle brake and compensator hybrid. It virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and allows the shooter to make very fast follow up shots. Its unique chamber geometries give it a very soft feel in the shoulder and the gas ports dimensions have been strenuously tested to give the utmost control to the muzzle.

List Price: $79.99
Our Price: $65.00
Savings: $14.99
Aero Precision Stripped Upper Receiver Aero Precision Stripped Upper Receiver

Forged from 7075-T6 aluminum, this assembled upper receiver is precision machined to mil-spec M16/M4 specifications and features M4 feedramps. Match this upper with one of Aero Precision's AR-15 lower receivers for a solid and dependable fit. This upper receiver is completely stripped for unlimited customization.

List Price: $79.99
Our Price: $65.00
Savings: $14.99